Device instructions a.The filter should be fixed on the box with 4*M 1.6 screw mounting screws to ensure that the filter shell is in close contact with the box to ensure a good grounding. b.Weld the input and output pins of the filter in the circuit. The welding time should not be too long and the temperature of the filter exceeds 180°C. Otherwise, the internal welding of the filter will be damage...

An LC bandpass filter is an electronic circuit or device used in electronics and telecommunications to allow a specific range of frequencies to pass through while attenuating or blocking frequencies outside of that range. It is called an "LC" filter because it typically consists of passive components: inductors (L) and capacitors (C). The LC bandpass filter is designed to have a certain center fre...